top of page
Modern minimalist biotechnology laboratory equipment used for HPLC purity analysis

Understanding HPLC Purity Testing: How to Read a Peptide COA

Oct 2
4 min read

HPLC (High-Performance Liquid Chromatography) is the analytical technique used to measure the purity of a peptide sample. When you review a Certificate of Analysis (COA), the HPLC result tells you what percentage of the sample is the target peptide versus impurities. A purity reading of 98% means that 98% of the sample’s composition is the intended compound.

What Is HPLC?

High-Performance Liquid Chromatography is a separation technique that has been the gold standard in peptide quality control for decades. It works by dissolving a sample in a liquid solvent and forcing it through a column packed with a stationary-phase material under high pressure. Different molecules in the sample interact with the column material at different rates, causing them to separate and exit the column at different times.

The separated components pass through a detector — typically a UV detector set to 214–220 nm, the wavelength range where peptide bonds absorb strongly. The detector records the signal over time, producing a visual output called a chromatogram.

How HPLC Testing Works

The HPLC process for peptide analysis follows a consistent workflow:

  1. Sample preparation: A small amount of the peptide is dissolved in a compatible solvent.

  2. Injection: The dissolved sample is injected into the HPLC system.

  3. Separation: The sample passes through a reverse-phase column (typically a C18 column) under high pressure. An acetonitrile/water gradient is used as the mobile phase. Different molecules interact with the column differently and exit at distinct times.

  4. Detection: A UV detector records the absorbance of each separated component as it exits the column.

  5. Chromatogram output: The result is a graph showing peaks. Each peak corresponds to a separated compound. The target peptide appears as the dominant peak.

Reverse-phase HPLC (RP-HPLC) is the most widely used method for peptide analysis because peptides separate effectively based on their hydrophobicity differences on C18 columns.

Reading HPLC Results on a COA

When you review a COA from Aminexor or any other supplier, the HPLC section will typically include:

  • Purity percentage: The area of the target peptide peak divided by the total area of all peaks, expressed as a percentage. For example, “HPLC Purity: 98.5%” means 98.5% of the detected material is the target peptide.

  • Retention time: The time (in minutes) at which the target peptide exits the column. This value is characteristic of the compound under the specific testing conditions used.

  • Chromatogram: The graphical trace showing all detected peaks. A high-purity sample will show one dominant peak with minimal or no secondary peaks.

  • Method details: Column type, mobile phase composition, gradient programme, flow rate, and detection wavelength. These details allow the test to be reproduced independently.

What Is a Good Purity Level?

Purity expectations depend on the research application:

  • >95%: Standard research grade. Suitable for most in-vitro assays and general laboratory work.

  • >98%: High purity. Preferred for quantitative studies, binding assays, and experiments where impurity interference must be minimised.

  • >99%: Ultra-high purity. Used for sensitive applications such as structural studies, receptor binding characterisation, and reference standard preparation.

Most reputable research peptide suppliers, including Aminexor, offer products at 95%+ purity as standard, with many batches exceeding 98%.

HPLC vs Mass Spectrometry: Two Complementary Tests

HPLC and mass spectrometry answer two different questions about a peptide sample:

  • HPLC answers: “How pure is the sample?” — It quantifies the proportion of target peptide versus impurities.

  • Mass spectrometry (MS) answers: “Is this the right molecule?” — It measures the molecular weight to confirm the correct peptide sequence was synthesised.

A complete COA should include both tests. HPLC alone confirms purity but not identity; MS alone confirms identity but not purity. Together they provide a full quality picture. This is one of the nine checks to look for when evaluating any research peptide supplier.

Why HPLC Matters When Choosing a Supplier

A supplier’s willingness to publish HPLC data is one of the strongest indicators of quality and transparency. Key markers to look for:

  • Batch-specific testing: The COA should reference a specific lot or batch number, not generic or undated results.

  • Third-party testing: Independent laboratory testing adds credibility beyond in-house QC.

  • Full method disclosure: Column type, gradient, and detection wavelength should be stated so the analysis can be verified.

  • Chromatogram included: The raw graphical output, not just a purity number, allows researchers to evaluate the quality of the separation.

Once you have verified your peptides, proper storage is essential to maintain their purity over time. See our Peptide Storage & Stability Guide for handling best practices.

Frequently Asked Questions

What does HPLC stand for?

HPLC stands for High-Performance Liquid Chromatography. It is the industry-standard analytical technique used to measure the purity of peptide samples by separating their chemical components.

What purity percentage should I look for in a research peptide?

For most research applications, a purity of 95% or higher is standard. Many suppliers offer peptides at 98%+ purity. The appropriate threshold depends on the sensitivity of your research protocol.

What is a chromatogram?

A chromatogram is the graphical output of an HPLC analysis. It shows peaks plotted against time, where each peak represents a separated compound. The height and area of the main peak relative to any impurity peaks indicate the sample’s purity.

Can HPLC identify which peptide is in the sample?

HPLC alone measures purity but does not confirm molecular identity. Mass spectrometry (MS) is the complementary technique used to verify that the correct peptide sequence was synthesised. A complete COA includes both HPLC and MS data.

What is the difference between HPLC and mass spectrometry?

HPLC measures how pure a sample is by separating its components. Mass spectrometry measures the molecular weight of the compound to confirm its identity. Together they answer two questions: is it pure, and is it the right molecule?

How often should peptide batches be tested?

Every manufacturing batch should be independently tested before release. Reputable suppliers test each batch and publish a batch-specific Certificate of Analysis rather than reusing results from a previous production run.

Where can I find COAs for Aminexor products?

Aminexor publishes third-party Certificates of Analysis for every product on the Lab Results page, including HPLC purity data and mass spectrometry confirmation.

Disclaimer: All products sold by Aminexor are designated Research Use Only (RUO). They are not intended for human or veterinary diagnostic or therapeutic use. Aminexor makes no claims regarding the safety or efficacy of these products for any clinical application.

Comments


bottom of page